Category Archives: Uncategorized

Elegant Gold Pattern


Elegant Gold Pattern

Black and Gold colours again! I’ve just moved across the world from Australia to Britain for 4 months and I was only able to bring 10 polishes! Not nearly enough! So I’m kinda lacking in colours right now. For the next four months you’ll be seeing the same 10 colours! And also for some reason this is the only picture I have of this design! I can’t believe I remembered to get the progress shot but not the final! 😦 Oh well you can see the final design on one of the nails! That’ll have to be good enough because I’m way too lazy to redo the same design again!

Anyway let’s get into how to do this. You will need 2 colours of polish, a dotting tool (mine’s homemade 😉 ), something to put polish on and a top coat polish. Begin with your base colour and paint all of your nails with as many coats as your polish requires to get a good coverage and colour. Once your base colour is dry put some of your second coloured polish onto your palette of choice, mine is a piece of plastic. Then use your dotting tool to mark out big dots over your nail as shown in the pic on the middle finger. Once you have your markers you should easily be able to add in smaller dots between them to create the diamond shaped criss crossed patterns. I could only fit about 2 little dots between the bigger dots. Then you can apply your top coat and your finished! I hope you enjoy these nails! 🙂 Have a good week!




Hellooo!! I haven’t ben posting for a while because I hate to say it but I’ve been lazy! Moving across to the other side of the world will do that to you! So, I bought these stickers at the Big Design Market in Melbourne a couple of months ago before I came to Britain and I’ve finally decided to try them out! They’re really easy to use and I’ve included pics of the front and back of the packaging, which has the instructions for how to use these stickers.


I found that they didn’t stick on the ends very well on the tips of my nails. I had to use clear nail polish underneath to tips to help to stick it down, other than that they did what they were supposed to do!!


Christmas Trees!



I know I’m very delayed with this one because Christmas has come and gone ages ago but I did some christmas trees on my Mum on Christmas day and I’ve been so slack recently because of new years and then moving to the UK to study for 3 months! So I’ve been very busy and I’m only just settling in even though I’ve been here a week already! haha So I did some little christmas trees on my mum using green glitter! I got her to paint her nails silver because she gets really fussy with her nails and if I do it she’ll find a million things wrong with it!!

Anyway once she’d done and it was all dry I started putting masking tape over the nails that she wanted Christmas trees on. I cut up heaps of little triangles out of masking tape and made the christmas tree shape. It’s really difficult to describe and I didn’t take a picture whoops, but I’ll do my best. I stuck two pieces of triangular shaped tape to the top if the nail to create the tip of the tree. The another two below that with the points facing toward each other, which will form the complete top of the tree and the top lines of the second level of the tree. I continued this until I ran out of nail. I did one all the way to the bottom but I didn’t like it and so I stuck another piece of masking tape along the bottom to cut off the bottom bit on all the others and we liked that better!


Once all the nails you want to have trees on are taped up you can paint these nails with green polish, or whatever colour your glitter is so that if there are gaps in the glitter then it won’t be as obvious!  While the green polish is still wet use a sponge to dab some green glitter onto it so that it will have something to stick to. If your having trouble making it stick put some of the green  or clear polish onto the sponge and then add the glitter over that on the sponge and use this to dab the glitter on. It should have no trouble sticking if you do it that way. The you need to wait and wait until it’s completely dry before removing the tape, otherwise the lines of the tree won’t be as defined and it will look sloppy. When it’s dry carefully peel back the tape which should all come of at once because the triangle pieces were overlapping and should be stuck to one another. Then the Christmas trees will be revealed!! As always do a shiny top coat to protect the design especially because there are bits of loose glitter, and it’s all finished! Enjoy these late Christmas trees! And hope you all had a wonderful Christmas!

White on White



I really love the idea of white on white and black on black, especially when you throw in different finishes like a matte finish put together with a shiny finish. It looks really clean and fresh and modern, which I really like. So I went polish bargain hunting and found a Revlon Matte/Suede finish polish for $5.00 (Australian) Wooo! It’s called Powder Puff in case you were wondering. I paired this polish with a shiny finish white polish that I already have to do some white on white polka dots!

To do this is very easy and quite quick too. You just need to paint on your base colour with the Matte/Suede or whatever finish you prefer, to all your nails. Depending on your polish you may need a few extra coats, as I found when using Powder Puff. I ended up doing 3 coats to get it to look like this. Once of all of your nails are dry you can get going on the polka dots! So you’ll need a palette of some kind to put polish onto, for example a paper plate. I use a piece of plastic, like from the cover of display books. Dab some of the white shiny polish onto your palette and you can then use a dotting tool, even a homemade one like mine to apply the shiny white dots to your nails.

I went with a very straight and easy grid of nine dots and I just did it by eye rather than fussing about perfectly measuring the space between each dot because that’s nuts! And finally, do not do a shiny top coat! Because then you’ll take away the Matte/ Suede finish and that’s not what we want! So if you want your dots to be more shiny compared to the base colour you can just add shiny top coat to the dots using the dotting tool. This is not neccessary because the polish should already have it’s own shininess and it doesn’t really protect the final design if you do it. Whatever suits you is fine! I hope you enjoy this design as much as I do with it’s white on white look!